Panasonic kx-tg5428r 사용자 설명서
Programmable Settings
For assistance, please call 1-800-211-PANA (7262).
35
Re-registering the handset
If “No link to base. Move closer
to base, try again.
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
unit, you may need to re-register the
handset to the base unit.
Important:
L
Make sure the base unit is not being
used.
used.
L
Have the handset and base unit near
each other when re-registering the
handset.
each other when re-registering the
handset.
1
Handset:
Press {MENU}.
Press {MENU}.
2
Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
pressing {V} or {^}, then press {>}.
3
Scroll to “Registration” by pressing
{V}
{V}
or {^}, then press {>}.
4
Base unit:
Press and hold {HANDSET
LOCATOR} until the CHARGE
indicator flashes.
Press and hold {HANDSET
LOCATOR} until the CHARGE
indicator flashes.
L
After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
flashing, the rest of the procedure
must be completed within 1 minute.
5
Handset:
Press {OK}, then wait until the handset
beeps.
Press {OK}, then wait until the handset
beeps.
L
Registration is complete.
Customer support
The handset can display the Internet
address where you can download
operating instructions for this product
using your computer.
address where you can download
operating instructions for this product
using your computer.
1
Press {MENU}.
2
Scroll to “Customer support” by
pressing {V} or {^}, then press {>}.
pressing {V} or {^}, then press {>}.
L
“www.panasonic.com/support”
will be displayed.
will be displayed.
3
Press {OFF}.
TG5428.book Page 35 Friday, August 25, 2006 9:54 AM