Panasonic KX-TG8070E 사용자 설명서
Useful Information
34
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Answering system (KX-TG8090/KX-TG8092/KX-TG8093)
For DSL users
We recommend connecting a filter (contact your DSL service provider) to the telephone line between the
base unit and the telephone line jack.
We recommend connecting a filter (contact your DSL service provider) to the telephone line between the
base unit and the telephone line jack.
Problem
Cause & solution
The unit does not record new
messages.
messages.
L
The answering system is turned off. Turn it on (page 23).
L
If you subscribe to the voice mail service, messages are
recorded by your service provider/telephone company not
your telephone. Change the unit’s “Number of Rings”
setting or consult your service provider/telephone
company (page 26).
recorded by your service provider/telephone company not
your telephone. Change the unit’s “Number of Rings”
setting or consult your service provider/telephone
company (page 26).
I cannot operate the answering system
with the handset or the base unit.
with the handset or the base unit.
L
The base unit or another handset is being used. Wait for
the other user to finish.
the other user to finish.
L
A caller is leaving a message. Wait for the caller to finish.
L
The handset is too far from the base unit. Move closer.
I cannot operate the answering system
remotely.
remotely.
L
You are entering the wrong remote access code. If you
forget the remote access code, store a new remote
access code (page 25).
forget the remote access code, store a new remote
access code (page 25).
L
Press each key firmly.
L
The answering system is turned off. Follow the steps in
“When the answering system is off”, page 25.
“When the answering system is off”, page 25.
L
You are using a rotary/pulse telephone. Try again using a
touch-tone phone.
touch-tone phone.
L
Remote operation is not available unless you change the
remote access code from the default setting (“0000”).
Change the remote access code.
remote access code from the default setting (“0000”).
Change the remote access code.
While recording a greeting message or
listening to messages, the unit rings
and recording stops.
listening to messages, the unit rings
and recording stops.
L
A call is being received. Answer the call and try again
later.
later.
The call screening setting turns “On” or
“Off” even though I set it differently.
“Off” even though I set it differently.
L
You pressed {^} or {V} when screening a call or when the
base unit was in standby mode. Set the call screening
setting again (page 26).
base unit was in standby mode. Set the call screening
setting again (page 26).
TG8070-8090E(e).book Page 34 Monday, June 11, 2007 8:12 PM