Panasonic nvvp33 사용자 설명서
- 5 -
TV screen
The picture with interference
On-Screen Display
Test pattern indication
Removing Interference / Changing RF-output channel
In some cases, interference (lines or patterning) or a very poor picture
may appear on the TV when the VCR is connected. If this happens,
follow the steps below to change the video playback channel (RF output
channel) to remove the interference.
may appear on the TV when the VCR is connected. If this happens,
follow the steps below to change the video playback channel (RF output
channel) to remove the interference.
!
Press the MENU button for more than 5 seconds. The RF output
channel number is displayed on the VCR display.
VCR Ch:28
The clear picture
!
Press ENTER to finish this setting.
!
Press the Numeric buttons or use the Channel (CH) button
to select a channel number, which differs by 2 or 3 from the
present channel number. (For example, if the original
channel number was 28, enter 31.)
to select a channel number, which differs by 2 or 3 from the
present channel number. (For example, if the original
channel number was 28, enter 31.)
21
68
(RF OFF)
...
!
Retune your TV until you receive the Test pattern. It may be necessary
to repeat steps above until you can see the Test pattern clearly.
If using a Scart cable please see the note below.
to repeat steps above until you can see the Test pattern clearly.
If using a Scart cable please see the note below.
VCR display
Indication when the RF output
channel is 28 (example)
Indication after changing the RF
output channel to 31 (example)
Test pattern indication
VCR Ch:31
MENU
8
9
CH
TRACKING/V-LOCK
ENTER
!
Press MENU for about 5 seconds. The preset channel will be
displayed on the VCR-display.
displayed on the VCR-display.
!
Press channel select buttons CH or 0 to invoke [- -].
!
Confirm with ENTER.
D
Set the RF output channel of the VCR to [- -] (RF OFF) if the VCR is
connected to the TV via the 21-pin Scart cable.
connected to the TV via the 21-pin Scart cable.