Panasonic proline ag-vp320 사용자 설명서

Check the following points if you are having trouble with your DECK.

PROG buttons do not respond...

• PROG functions are not available in COMPONENT Video

Output and S-VIDEO OUT. Set TV to either RF IN or VIDEO
IN. (p. 10)

• Check Remote batteries. (p. 4)
• Press VCR or DVD button for DVD/VCR mode. (p. 28)

No power…

Power turns itself off...

• Completely insert Power Plug into an AC outlet.
• Press POWER button on.
• Make sure power source is active.

• Auto power-off (shutoff) occurs after about 5 min. in DVD

mode with no operation, or if there is no broadcast signal in
TV or Playback mode.
Turn the power back on. (pp. 23, 33)

TV program cannot be recorded...

• Check connections between DECK, external antenna, and

TV.

• Check channel selections.
• Make sure your antenna system (CABLE or TV) is correctly

set. (Channels [p. 18])

• Make sure cassette record tab is intact. (p. 6)

• Confirm that clock is set to current time and date.
• Make sure Cable/DSS box (if used) is left on and tuned to

channel to be recorded.

• Set recording start/stop times correctly. (p. 24)
• Timer recording may not be performed or continued if a power

interruption occurs before or during a Timer Recording, even
after power is restored.

Timer recording cannot be
performed…

• Select channel 3 or 4 on TV to match VCR output channel

(3 or 4) (p. 16) or select LINE.

• Set VCR/TV selector to “VCR.”
• Adjust TRACKING control in either direction. (p. 4)
• Try Head Cleaning. (p. 4)

There is no playback picture, or the
playback picture is noisy or contains
streaks...

• Set TV’s Vertical Hold Control to MANUAL, then adjust.

During special effects playback
picture may contain some vertical
jitter when using a TV with an
Automatic Vertical Hold Control...

• Make sure DECK power is on.
• Check Remote batteries.
• Make sure Remote is in proper mode. (p. 28)
• Make sure Timer Recording is not in progress.

DECK cannot be controlled...

DECK cannot be remote controlled...

• Make sure DECK power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control directly at remote sensor on DECK. (p.9)
• Avoid any object blocking signal path.
• Check Remote batteries. (p. 4)
• Exposing DECK remote sensor to direct fluorescent

or outdoor light may cause signal interference.