Panasonic SC-HT800V 사용자 설명서

43

RQT6951

The unit tunes automatically after you plug it in and turn it on for the first time (

➡ page 15, Plug-in Auto Tuning), but you can start the process 

again if necessary.
≥Make sure you have tuned to a television channel. This does not work if you have selected “AU” channel.

3, 4] to select “CHANNEL SET” and press [ENTER].

3, 4] to select “ANTENNA 

3, 4] to select “TV” or 

Channels are set corresponding to the antenna system you select. 
This is set automatically when you do Plug-in Auto Tuning.

To exit the settings screen
Press [MENU] until the screen disappears.

Auto tuning searches for TV stations and memorizes every tuned 
program position. Other program positions are skipped. (Channel 
range 

➡ right)

3, 4] to select “AUTO” and 

Auto tuning starts. It takes three or more minutes to complete.

To stop partway through
Press [MENU].

You can manually preset channels that are skipped when using the 
auto channel setting, and manually skip channels that are preset.

3, 4] to select “MANUAL” and 

3, 4] to select “CH” and 

2, 1] to select the channel.

3, 4] to select “BLANK” and 

2, 1] to select “ON” or “OFF”.

To exit the settings screen
Press [MENU] until the screen disappears.

∫ Channel range

≥TV mode

≥CATV mode

≥

3 4

VHF

2–13

UHF

14–69

VHF

2–13

CATV LOW BAND

95–99

CATV MID/SUPER BAND

14–36

CATV HYPER BAND

37–65

ULTRA BAND

66–94

100–125

SPECIAL CATV CHANNEL

1

s

/r:

3

4

2 1

¥

[Remember]

6951en.book  43 ページ  ２００３年４月４日 金曜日 午後２時２４分