Panasonic sc-hdx2 사용자 설명서
5
Operation
Standby/on switch (
I)
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
Operation indicator
The indicator lights red. Four seconds later it turns green to indicate
that operation is possible.
In standby mode, the unit is still consuming a small amount of
power.
Operation indicator
The indicator lights red. Four seconds later it turns green to indicate
that operation is possible.
If you have connected a subwoofer, adjust the subwoofer’s volume
to suit the included speakers, then adjust the volume on this unit.
to suit the included speakers, then adjust the volume on this unit.
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution.
¡
Never use alcohol, paint thinner or benzine to clean this unit.
¡
Before using chemically treated cloth, read the instructions that came with the cloth carefully.
Maintenance
VOLUME
VOLUME
3
Start play on
the other unit.
the other unit.
4
Adjust the volume.
1
Turn [VOLUME] to
“MIN”.
“MIN”.
MAX
MIN
MAX
MIN
Operation
indicator
indicator
I
2
Press [
I] to turn
on the unit.
If irregular colouring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.