Panasonic sc-ht1000pp 사용자 설명서
13
RQT7061
REC
ORDING
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
1
While stopped
Press [F.Rec].
2
Press [
2, 1] to select “Hour” and
“Min.” and press [
3, 4] to set the
recording time.
You can also set the recording time with the numbered
buttons.
buttons.
3
Press [
3, 4, 2, 1] to select “Start”
and press [ENTER].
Recording starts.
To show the remaining time
Press [STATUS].
Press [STATUS].
[Note]
It may not be possible to record to the end of the program if the
remaining time doesn’t allow.
For your reference
≥Recording time is reduced if you repeatedly pause recording.
≥The recording mode automatically becomes FR mode.
remaining time doesn’t allow.
For your reference
≥Recording time is reduced if you repeatedly pause recording.
≥The recording mode automatically becomes FR mode.
[RAM]
To change the audio recording mode
To change the audio recording mode
Press [SHIFT]
r[AUDIO].
∫ While receiving MTS audio (Multi-channel
Television Sound Stereo)
[. Stereo: Main audio (stereo)
l
v
l SAP: Secondary audio program (SAP)
l
v
a- Mono: Main audio (monaural)
e.g., “Stereo” is selected
“((” appears when the unit is receiving
the audio type you selected.
[Note]
≥If you change the sound setting while recording, the recorded
sound will also change.
[RAM]
≥If recorded in SAP mode, main audio is also recorded. [RAM]
≥It will not be possible to alter the sound in the following cases:
≥It will not be possible to alter the sound in the following cases:
–When a DVD-R is in the disc tray.
–When recording mode is XP and “LPCM” has been selected in
–When recording mode is XP and “LPCM” has been selected in
the Audio menu, “Audio Mode for XP Recording” (
≥When recording MTS sound onto DVD-R or recording using LPCM,
only one of either the main channel or the sub channel can be
recorded. Select at “Select MTS” (
recorded. Select at “Select MTS” (
≥If the broadcast is “MonoiSAP”, audio will be monaural even if you
select Stereo mode.
≥Select “Mono” if reception is poor during a stereo broadcast.
Pictures being recorded are unaffected.
1 Switch [HOME THEATER, TV] to “TV”.
2 Press [TV/VIDEO] to change the television’s input mode to
1 Switch [HOME THEATER, TV] to “TV”.
2 Press [TV/VIDEO] to change the television’s input mode to
“TV”.
3 Press [
W X CH] to change channels.
You can also select the channel with the numbered buttons.
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
are in a hurry or before you go to bed.
During recording
Press [
¥ REC] to select the recording
time.
Each time you press the button:
0:30
0:30
"# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00
^"""""""" Counter (cancel) ,""""""""}
To show the remaining time
Press [STATUS].
Press [STATUS].
For your reference
≥This does not work during timer recordings (
≥This does not work during timer recordings (
➡page 14) or while
using Flexible Recording (
➡left).
≥Recording stops and the set time is cleared if you press [∫].
≥The set time is cleared if you change the recording mode or
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
Preparation
Connect a video cassette recorder to this unit’s input terminals
(
Connect a video cassette recorder to this unit’s input terminals
(
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
input channel for the equipment you
have connected.
Select L1, L2 or L3.
≥You can also select the input channel by pressing [W X CH].
≥You can also select the input channel by pressing [W X CH].
2
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
recording mode (XP, SP, LP or EP).
3
Start play on the other equipment.
4
Press [
¥ REC] at the point you want to
start recording.
Recording starts.
To skip unwanted parts
Press [
Press [
;] to pause recording. (Press again to restart recording.)
To stop recording
Press [
Press [
∫].
[Note]
≥When recording using L1, L2 or L3 terminals, only the sound
received at the time of recording will be recorded.
≥If Flexible Recording (
➡left) is used instead of steps 2 and 4,
settings can be made so that recording continues to the end of the
video.
video.
Recording the best quality pictures
within the set amount of time—Flexible
Recording
within the set amount of time—Flexible
Recording
Selecting the audio recording mode
FLEXIBLE REC
Start
Cancel
Record on FR mode
ENTER
SELECT
RETURN
Set up rec time
2 Hour 15 Min.
Maximum rec time
1 Hour 00 Min.
CH 12
Stereo
No disc
((
Watching the television while recording
Specify a time to stop recording
Recording from a video cassette
recorder
recorder
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
e.g.,
7061en.book 13 ページ 2003年6月16日 月曜日 午前10時12分