Panasonic sc-ht1000pp 사용자 설명서
42
RQT7061
SE
TTI
NGS
Changing the unit’s settings
Panasonic DVD players and recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
≥Use “1”, the factory set code, under normal circumstances.
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
≥Use “1”, the factory set code, under normal circumstances.
While SETUP menu screen is displayed
1
Press [
3, 4] to select “Set Up” and
press [
1].
2
Press [
3, 4] to select “Remote
Control Code” and press [ENTER].
3
Press [
3, 4] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
4
While pressing [ENTER] on the remote
control, press and hold for about 2
seconds the numbered button ([1], [2]
or [3]) corresponding to the code you
selected in step 3.
control, press and hold for about 2
seconds the numbered button ([1], [2]
or [3]) corresponding to the code you
selected in step 3.
The remote control code on the remote control has been set.
The following display appears when you use a remote control with a
different code.
different code.
Change its code to match the unit’s (
➡step 4).
Enhance sound perception using this feature. Adjust the delay time
for Dolby Digital when receiving multi-channel digital audio
broadcast on satellite or cable TV, or for Dolby Pro Logic II when
Dolby Pro Logic II is turned on.
for Dolby Digital when receiving multi-channel digital audio
broadcast on satellite or cable TV, or for Dolby Pro Logic II when
Dolby Pro Logic II is turned on.
While SETUP menu screen is displayed
1
Press [
3, 4] to select “Audio” and
press [
1].
2
Press [
3, 4] to select “Speaker” and
press [ENTER].
3
Press [
3, 4] to select the delay time
box and press [ENTER].
4
Press [
3, 4] to adjust the delay time
and press [ENTER].
Values
If distance
If distance
a or b is greater than or equal to distance c, set to “0”.
If distance
a or b is less than distance c, set as follows.
a Center speaker
b Surround speakers
When you change the surround speaker setting for Dolby Digital, the
setting also changes for Dolby Pro Logic II.
setting also changes for Dolby Pro Logic II.
When you are finished
Press [
Press [
2] to select “Complete” and press [ENTER].
Changing the remote control code
CH
VOLUME
SKIP
STOP
PAUSE
PLAY/x1.3
SLOW/SEARCH
CANCEL
1
2
3
4
5
6
7
8
9
0
100
HOME THEATER
TV
STATUS
MULTI REAR
MARKER
S.POSITION
F.Rec
C.FOCUS
REC MODE
CH SELECT
RETURN
P.MEMORY
EQ/SFC
ERASE
ADD/DLT
PROG/CHECK
L1/OPT
FUNCTIONS
TOP MENU
ENTER
DIRECT NAVIGATOR
MENU
PLAY LIST
MIX
2CH
FRAME
REC
TEST
CM SKIP
SETUP
MUTING
AUDIO
S W. LEVEL
FM/AM
TV/VIDEO
INPUT SELECT
OPEN/CLOSE
DISPLAY
DVD
VCR Plus+
POWER
POWER
PRO LOGIC
TIME SLIP
SHIFT
SHIFT
RETURN
3, 4, 2, 1
ENTER
Numbered
buttons
buttons
The unit’s remote control code
Changing the delay time (Speaker)
Difference
Setting
Approx. 30 cm (1 foot)
1.0 ms
Approx. 60 cm (2 feet)
2.0 ms
Approx. 90 cm (3 feet)
3.0 ms
Approx. 120 cm (4 feet)
4.0 ms
Approx. 150 cm (5 feet)
5.0 ms
Difference
Setting
Approx. 150 cm (5 feet)
5.0 ms
Approx. 300 cm (10 feet)
10.0 ms
Approx. 450 cm (15 feet)
15.0 ms
ms
ms
L
Complete
LS
R
SW
C
RS
5.0
0.0
Multi Channel
RETURN
ENTER
SELECT
Center delay time
Surround delay time
LS
RS
L
R
SW
b
c
a
C
7061en.book 42 ページ ２００３年６月１６日 月曜日 午前１０時１２分