Panasonic SC-HT855 사용자 설명서

R

Q

T

8606

6

Simple

 Se

tu

p

∫ Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached 

should be capable of supporting over 10 kg per screw. Consult a 
qualified building contractor when attaching the speakers to a 
wall. Improper attachment may result in damage to the wall and 
speakers.

≥ When mounting the front speakers to a wall, we recommend 

using a string (not included) to prevent it from falling.

1 Attach the cover plate to the front speaker.

2 Drive a screw (not included) into the wall.

3 Fit the speaker securely onto the screw(s) with the hole(s).

Reattaching the speaker cable to the stand
1 Remove the eight screws from the stand, and remove the speaker net.

2 Position the cable.

3 Attach the speaker net with the screws.

∫ Fitting speaker stands

(not included)

(Except front speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance 
between screws as shown in the diagram.

≥ The stands must be able to support over 10 kg.
≥ The stands must be stable even if the speakers are in a high position.

Preparation for front speakers
1

Remove the speaker cable from the stand.

2

Connect the cable (

➜ page 5).

Release the cable 
from the groove.

1

2

Screw
Tighten securely.

‰7.5 to 9.5 mm

5.0 to 7.0 mm

Wall or pillar

‰4.0 mm

106 mm

200 mm

340 mm

In this position, the 
speaker will likely 
fall if moved to the 
left or right.

Move the speaker 
so that the screw is 
in this position.

e.g.

Press the cable 
into the groove.

Approx.15 cm

Speaker stand
(not included)

Plate thickness plus
7 mm  to  10 mm

e.g. Center speaker

5 mm, pitch 0.8 mm

Metal screw holes
For attaching to 
speaker stands

60 mm

8606En_p04-13.fm  Page 6  Thursday, March 9, 2006  8:57 PM