Panasonic sdr-h250gc 사용자 설명서

LSQT1212

It is possible that the system cannot complete writing of a file normally when, for example, power is 
turned off for some reason during recording or editing.
If faulty management information is found when the HDD or a card is accessed, one of the following 
messages may appear. Be sure to follow the messages. (Repairing may take time depending on the 
error.)

≥ When you repair the data, use a battery with sufficient battery power or the AC adaptor. Even if the 

power is turned off without repairing the data, you can repair the data when you turn the power on 
again.

≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ Do not repair a card that has been recorded on another device. This may cause the loss of data or 

the card.

You are attempting to use a function that cannot be used 
simultaneously.

The unit has detected that it is being dropped so the operation has 
stopped.

The internal temperature of this unit is high so it cannot be operated. 
Turn off the power, wait until the temperature falls and then turn on 
the power again.

The internal temperature of this unit is extremely low so it cannot be 
operated.
If “Please Wait.” appears after this message, wait a while without 
turning the unit off. It may take time until the unit can be used.

An irregularity in the unit has been detected. Remove the SD card 
then press the RESET button to restart the unit. (l 202)

The unit cannot correctly establish the connection to the computer 
or printer. Disconnect and reconnect the USB cable and then select 
the desired USB function again.

The unit’s power cannot be turned off when the unit is connected to 
the computer.

LSQT1212_GC(EN).book  195 ページ  ２００７年２月１５日　木曜日　午前１０時１３分