Panasonic tc-23lx60 사용자 설명서

42

43

 Frequently 

Asked Questions

 Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or 
a soft, lint-free cloth.

•

If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to 
remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of 
the same type, until the surface is dry.

•

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact 
with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the surface may be 
adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

•

If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry.

  Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

•

Do not allow any detergent to come into direct contact with the surface of the LCD TV.

  If water droplets get inside the unit, operating problems may result.

•

Avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the 
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods 
in contact with articles made from rubber or PVC.

Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Servicenter for assistance. For details (p. 47, 48)
For additional assistance, please contact us via the website at: 
www.panasonic.com/contactinfo
www.panasonic.ca

•

Check the position, direction,
and connection of the aerial.

•

Change the direction of antenna 
for digital channels.

•

Check “Signal meter” (p. 19).
If the signal is weak, check the
antenna and consult your local
dealer.

•

There are some looseness around 
the panel to prevent the damage to 
the panel.

  The panel might move slightly 

when it is pushed with a finger, and 
clattered sound might be heard. 
This is not a malfunction.

•

Are the batteries installed correctly? (p. 6)

•

Has the battery run down?

•

To operate external equipment of other
manufacturers, register the
remote control codes. (p. 20, 37-38)

•

Is the HDMI cable connected properly?
(p. 22-23, 41)

•

Turn Off the TV unit and equipment, then 
turn them On again.

•

Check an input signal from the equipment.
(p. 41)

•

Use a equipment compliant with 
EIA/CEA-861/861B.