Panasonic WJ-HD200 사용자 설명서

32

2. Select either ON or OFF with the JogDial, and press the

JogDial.
The default is OFF.

ON: The buttons are password protected. The recorder

enters the button lock mode if neither a button nor
the JogDial is operated within a period of five min-
utes.

OFF: No password protection is applied.

3. Move the cursor to ALL

→ or OPERATION→ with the

[D] or [C] button.

ALL: Allows both normal operations and setup opera-

tions.

OPERATION: Allows only normal operations. Setup

operations are not allowed.

4. Press the JogDial.

The preset password appears.
The default is "12345" for both ALL and OPERATION.

<New password setting>

5. Select a digit, rotating the JogDial.

6. Enter a number with the numeric button, and press the

JogDial.
The cursor moves one digit to the right.

7. Repeat steps 5 and 6 until all digits are entered.

8. Press the [SETUP/ESC] button to confirm the entered

password.
Go back to step 3 if you have not yet set the OPERA-
TION password.

● Keylock Buzzer Setup (KEYLOCK

1. Move the cursor to KEYLOCK BUZZ with the [D] or [C]

button.

2. Select either ON or OFF with the JogDial, and press the

JogDial.
The default is ON.

ON: Buzzer beeps when unauthorized access takes

place.

OFF: Buzzer does not sound.

● Skip Alarm Recall Setup

Alarm log pages are recalled on the monitor when the
JogDial is pressed for 2 seconds. When searching in the
log, you may need to skip pages. The page will skip the
specified number forward or backward from the displayed
page when rotating the JogDial.

1. Move the cursor to SKIP ALM RECALL with the [D] or

[C] button, and press the JogDial.

2. Select the number of skip pages with the JogDial, and

press the JogDial.
The default is 1 page.
Available skip pages: 1, 5, 10, 20, 50 pages

● Simultaneous Recording & Playback

This setting specifies whether to allow simultaneous play-
back and recording. When the parameter is set to ON, the
default of the recording rate will be changed to 15 FPS.

1. Move the cursor to SIMUL REC&PLAY with the [D] or

[C] button.

2. Select on or off with the JogDial, and press the JogDial.

The default is ON.

ON: Allows simultaneous recording and playback

including remote-access playback and FTP access.
The default recording rate is 15 FPS, and the high-
est rate is 30 FPS.

OFF: Places priority on recording triggered by pressing

the REC button or by an alarm input. Playback
including remote-access playback and FTP access
will be interrupted if recording starts. The default
recording rate is 15 FPS, and the highest rate is 30
FPS.

• A 30 FPS recording rate will decrease to 15 FPS

when playback, remote-access playback, or FTP
access is carried out simultaneously with recording.

→          ***** 

→    *****

→          ***** 

→    *****