Panasonic WJ-HD200 사용자 설명서
47
Recording
Notes:
• When SIMUL REC&PLAY (simultaneous recording and
playback) is set to OFF in the setup, any recording will
stop playback and start the recording. Playback is
unavailable while recording.
stop playback and start the recording. Playback is
unavailable while recording.
• When set to ON, recording is available while playing
back.
• The recording rate will degrade to 15 FPS while display-
ing a quad split screen.
■ Internal Timer Recording
When INT is set for TIMER in the WJ-HD200 MAIN menu,
the presets made in the internal timer will take effect.
Internal timer recording begins when the preset start time
comes and continues until the preset end time comes. Up
to four programs, containing four events each, can be
assigned to the weekly and/or daily schedule.
the presets made in the internal timer will take effect.
Internal timer recording begins when the preset start time
comes and continues until the preset end time comes. Up
to four programs, containing four events each, can be
assigned to the weekly and/or daily schedule.
Note: When SIMUL REC&PLAY is set to OFF, a preset
recording interrupts playback and starts at the preset
start time.
start time.
■ Power-on Recording
For power-on recording, select EXT for TIMER in the WJ-
HD200 MAIN menu. The recorder starts recording when AC
power is supplied.
This enables the disk recorder to start recording everyday
at a specific time by the use of a timer switcher that con-
trols the AC mains supplied to the recorder. The power
switch on the rear of the recorder must be turned on in this
case.
HD200 MAIN menu. The recorder starts recording when AC
power is supplied.
This enables the disk recorder to start recording everyday
at a specific time by the use of a timer switcher that con-
trols the AC mains supplied to the recorder. The power
switch on the rear of the recorder must be turned on in this
case.
4. To return to the all-channel list, press the button of the
selected channel (now lit) or the [MULTISCREEN
SELECT] button.
SELECT] button.
● To Search for Playback
1. Move the cursor to the desired event in the list, using
the [D] or [C] button.
2. Press the [PLAY] button to play back the recorded pic-
ture. The LED in the [PLAY] button lights up. The alarm
log on the monitor disappears.
log on the monitor disappears.
3. Press the [STOP] button to stop playback. The alarm
log appears again on the monitor.
4. Hold down the JogDial for 2 seconds to quit the alarm
log search.
● To Erase Log
All event records can be erased.
1. Move the cursor to "PUSH
→ DATA CLEAR", then press
the JogDial.
2. Rotate the JogDial to select YES or NO.
YES: Enables the log erasure.
NO: Disables the log erasure.
NO: Disables the log erasure.
3. Press the JogDial to carry out the selection.
Note: You can access pictures recorded on the disk by
time & date search even after they have been
erased.
erased.
PROG1 SETUP
NO. START END MODE
1
1
→ 8:00 12:20 SETO
2
→ 13:00 15:00 SETO
3
→ : :
4
→ : :
Timer
Switch
Switch
AC Mains
OPERATE
ALARM
SUSPEND
RESET
HDD
FULL
ERROR
OSD
MULTISCREEN
SELECT
ZOOM
TIMER
DST
REMOTE
LOCK
SEQUENCE
ALARM
SERCH
STOP
PLAY MODE SELECT
SETUP
/ESC
PLAY
TIME&DATE
SEARCH
REC STOP
SPOT
MULTI
MULTI
CAMERA SELECT
ALARM
RECALL
REC
PUSH— PAUSE SET
Digital Disk Recorder WJ-HD200
1
5
2
6
3
7
4
8