Panasonic WJ-HD200 사용자 설명서

51

Lock/Unlock Buttons
■ Password Verification

When a locked button is pressed, the key locked warning
appears on the monitor for 2 seconds, then it changes to
the password prompt.

1. Enter your five-digit password using the [CAM SELECT]

buttons (1-8). The buzzer shortly beeps once, and the
entered digit changes from "–" to " * " on the monitor.

2. The prompt window will display "KEY UNLOCKED!" for

2 seconds, and the buzzer beeps twice if the correct
password is entered. 
The monitor returns to the previous display. The
recorder allows access to the front panel controls if a
button operation takes place within 5 minutes of pass-
word entry.

3. Retry verification when password error appears on the

monitor.

The recorder will exit from verification if there is no opera-
tion within 30 seconds.

/

■ Enabling Button Lock

1. You need to register passwords in the SYSTEM SETUP

window prior to operating your system.

2. Press the [LOCK] button for 2 seconds.

The buzzer shortly beeps twice, and the LED in the but-
ton lights up. The "KEY LOCKED DONE!" message
appears on the monitor.

Note: Set PASSWORD LOCK to OFF if you do not want

the recorder to revert to button lock mode when no
operation takes place within 5 minutes.

LOCK