Panasonic WJ-HD200 사용자 설명서

60

REC: Records the camera channel regardless of alarm

or non-alarm status.

■ Manual Recording Setup 

Manual recording will take effect when OFF (not INT or EXT)
is selected in the Timer Mode Selection TIME REC window.
The parameters for alarm recording will be applied except
for the scheduled time zone if INT is selected.
Click the [REC SETUP] button on the setup control panel to
open the window.

Refer to 

● Recording Mode Setup PROG1-4 SETUP, NO. 1-

4 for operating procedures and available parameters.

■ Externally Specified Recording

This window specifies the recording mode and parameters
that will be changed when the switch externally connected
to the EXT REC terminal is turned on.

Refer to 

● Recording Mode Setup PROG1-4 SETUP, NO. 1-

4, for operating procedures and available parameters.

■ Display Setup (DISPLAY SETUP)

Time and date display and other displays of status informa-
tion are specified in this window.

8

Select a month, and type a day, year, hour, and minute.

8

TYPE1 24H: Time and date are displayed in one line in

the 24-hour system.

TYPE1 12H: Time and date are displayed in one line in

the AM-PM system.

TYPE2 24H: Time and date are displayed in two lines in

the 24-hour system.

TYPE2 12H: Time and date are displayed in two lines in

the AM-PM system.

8

ON: Time & date display is enabled. 
OFF: Time & date display is disabled.

8

Right-Lower: Displays time & date in the lower right

corner.

Right-Upper: Displays time & date in the upper right

corner.

Left-Lower: Displays time & date in the lower left cor-

ner.

Left-Upper: Displays time & date in the upper left cor-

ner.