AASTRA RFP 34 IP 69205XXX 전단

제품 코드
69205XXX
다운로드
페이지 2
Copyright © 2011 Aastra Technologies Limited. Aastra and the Aastra logo are trademarks or registered trademarks of Aastra Tech-
nologies Limited in the United States, Canada, European Union and other countries. Picture similar to product. The right for technical 
modifications is reserved.
Ref
er
enc
e 01/2011
Aastra Technologies Limited
155 Snow Blvd.
Concord, Ontario Canada
L4K 4N9
www.aastra.com
Features
DECT
 

All 120 DECT channels supported 
for maximum use of DECT capacity
 

8 simultaneous voice channels 
per  DECToverIP base station, 4 
additional channels for handover
 

GAP standard supported
 

Connection handover in line 
with the GAP standard
 

DSAA authentication between 
base and handset
 

Support of DECT encryption
 

Cordless system telephones can 
use all features offered by the 
OpenCom 100, 1000 and SIP-DECT
 

Integrated DECT antenna in RFP 32 IP
 

External dipole or directional 
antenna on the RFP 34 IP
Service and Installation
 

3 LEDs signalling the current 
operating state: on RFP 32 IP 
outside, on RFP 34 IP inside
 

Central configuration via 
Web-Configurator 
 

Central system journal
 

Central cluster administration
 

Wiring alternatively from below 
(cable duct) or from above 
(suspended ceiling) for RFP 32 IP
 

RFP 34 IP can be connected via 
RJ 45 or IDC (insulation displace-
ment contact) connectors
Ethernet
 

Connection via Ethernet 100 BaseT
 

Power supply in line with Power over 
Ethernet standard IEEE 802.3af, class 0
 

IPv4
VoIP
 

VoIP connection using 
RTP/RTCP protocol
 

G.711/G.723.1
1
/G.729AB
1
 codec 
depending on required voice 
quality and available bandwidth 
 

Quality of service supported 
by Diffserv/ToS Flag
 

Adaptive jitter compensation
 

Echo cancellation/suppression
 

Voice activity detection and 
comfort noise generator
Requirements
 

DHCP
 

TFTP
RFP 32 IP (Indoor)
 

Power supply:
• 
 Power  over  Ethernet  IEEE  802.3af, 
class 0 or
• 
230 V AC adapter
 

Ambient temperature:  
-5°C to +45°C
 

Relative humidity: 
5 to 95% (non-condensing)
 

Storage temperature:  
-40°C to +70°C
 

Current consumption: 120mA
 

Type of ingress protection: IP 20
 

Flame resistance UL94 V0-5VB
 

Wall-mountable
 

Colour: ice grey
 

Weight: 417 g (without AC adapter)
 

Dimensions (W x H x D): 
195 x 200 x 30 mm
RFP 34 IP (Outdoor)
 

Power supply:  
Power over Ethernet IEEE 
802.3af, class 0
 

Ambient temperature:  
-25°C to +55°C
 

Relative humidity: 
5 to 95% (non-condensing)
 

Storage temperature:  
-5°C to +45°C
 

Current consumption: 120mA
 

Type of ingress protection: IP 65
 

Flame resistance UL94 V0
 

Wall- and mast-mountable
 

Colour: light grey
 

Weight: 1.006 g
 

Dimensions (W x H x D): 
240 x 243 x 60 mm
Part numbers RFP 32 IP
 

RFP 32 IP 
69207
 

AC adapter 
68744 
for EMEA, NA, UK and Australia
Part numbers RFP 34 IP
 

RFP 34 IP (without antennas) 
69205
 

Dipole antennas  
4602421
 

Directional antenna  
4602422
 

Wall-mounting set 
4602286
 

Mast-mounting device Ø 65 mm 
4602437
 

Mast-mounting device Ø > 65 mm 
4602285
 

Antenna-mounting device 
71061801
 

Antenna cable 0,5m 
4604685
(1) Additional licence required