Panasonic WJ-GXE900 사용자 설명서
35
Begin the setup when the PC is in the same condition as it is just
after startup.
after startup.
The "Control Panel" window appears.
1. Select "Control Panel" ([Start] - [Settings] -
[Control Panel]).
2. Click once to select the [Network] icon.
Network Setup of the PC
To set up the network of the PC, first change the TCP/IP settings of the PC to match the default settings of the
encoder/recoder. The following are the default network settings of the encoder/recoder.
encoder/recoder. The following are the default network settings of the encoder/recoder.
• IP address of the encoder:
192.168.0.10
• IP address of the decoder:
192.168.0.11
• Subnet mask (both the encoder and the decoder):
255.255.255.0
• Default gateway (both the encoder and the decoder): 192.168.0.1
To access the camera, the IP address of the PC should be "192.168.0.XXX" (where XXX should be a number from 2
to 254 except 10 and 11). If the IP address of the encoder/recoder is set with the "Panasonic IP Setup" software,
perform the network setting of the PC according to the network environment.
The settings differ depending on which OS is installed on the PC. Confirm which OS is installed on your PC, and
proceed with the settings corresponding to your OS.
to 254 except 10 and 11). If the IP address of the encoder/recoder is set with the "Panasonic IP Setup" software,
perform the network setting of the PC according to the network environment.
The settings differ depending on which OS is installed on the PC. Confirm which OS is installed on your PC, and
proceed with the settings corresponding to your OS.
Using Windows 98 SE
The following procedures are examples when using Windows 98 SE. You can proceed in the same way when using
Windows Me.
Windows Me.