Panasonic WJ-GXE900 사용자 설명서

44

Perform the settings for the VIDEO IN connectors
respectively. The numbers of "CH" are the number of the
VIDEO IN connectors respectively.

• Click the [SET] button to save the changed settings.

Otherwise, the changed settings will not be saved.

• If 1.5 Mbps, 3.0 Mbps, or 3.8 Mbps is selected for

"BIT RATE", the right edge of images may not be
displayed. That is due to the characteristics of
processing circuit.

• When "BIT RATE" is changed, still images or blue

pictures may be displayed momentarily.

■ Item Descriptions

Enter a number of the desired camera whose picture
is to be displayed on the monitor.
1 to 99999 are available for the "CAMERA No.".
The default settings of the "CH1", "CH2", "CH3" and
"CH4" are 1, 2, 3 and 4 respectively.

Enter up to 16 alphanumeric characters to be
displayed on monitor screen as a camera title.
The default settings of the VIDEO IN 1 - 4
connectors are 1, 2, 3 and 4 respectively.

The "DESTINATION IP ADDRESS" and the
"DESTINATION PORT No." should be the same
values entered for the "RECEIVING IP ADDRESS"
and the "RECEIVING PORT No." of the decoder.
If they are not the same, pictures cannot be
displayed on monitors connected to the decoder.
Depending on the setting for the "DESTINATION IP
ADDRESS", the streaming method will be either
multicast or unicast. 
1024 to 65535 are available for the "DESTINATION
PORT No.".
The default settings of the "DESTINATION IP
ADDRESS" and the "DESTINATION PORT No." for
"CH1", "CH2", "CH3" and "CH4" are as follows (for
multicast).

CH1: 239.192.10.1/50000
CH2: 239.192.10.2/50000
CH3: 239.192.10.3/50000
CH4: 239.192.10.4/50000

All of the "DESTINATION PORT No." should be the
same if multicast IP addresses (224.0.0.0 to
239.255.255.255) are assigned to the
"DESTINATION IP ADDRESS".

• The "DESTINATION IP ADDRESS" should be the IP

address of the decoder receives streaming video and
audio data.

• Each "DESTINATION PORT No." should be different

depending on the video input channels.