Panasonic WJ-GXE900 사용자 설명서
69
VIDEO page
Perform the settings of the VIDEO OUT connectors
respectively. It is necessary to apply the same
parameters (values) set on the VIDEO page of the
encoder as the settings of the encoder for the settings
on this menu.
respectively. It is necessary to apply the same
parameters (values) set on the VIDEO page of the
encoder as the settings of the encoder for the settings
on this menu.
Notes
• Click the [SET] button to save the changed settings.
Otherwise, the changed settings will not be saved.
When the settings are changed, restarting the
decoder is necessary. The changed settings will be
valid after restarting the decoder.
Restarting the decoder can be performed on the
MAINTENANCE page.
Click the [MAINTENANCE] button in the left column
to display the MAINTENANCE page, and click the
[RESTART] button to restart the decoder.
When the settings are changed, restarting the
decoder is necessary. The changed settings will be
valid after restarting the decoder.
Restarting the decoder can be performed on the
MAINTENANCE page.
Click the [MAINTENANCE] button in the left column
to display the MAINTENANCE page, and click the
[RESTART] button to restart the decoder.
• Do the following when changing the multicast
transmission to the unicast transmission.
Stop the streaming of the encoder before
changing the settings of the decoder. Select
"UNICAST" on this page after clicking the [STOP]
buttons for all channels on the CONTRL/STATE
page of the encoder.
changing the settings of the decoder. Select
"UNICAST" on this page after clicking the [STOP]
buttons for all channels on the CONTRL/STATE
page of the encoder.
It is recommended to set the "RECEIVING STREAM
IP ADDRESS" and "RECEIVING STREAM PORT
No." as follows.
IP ADDRESS" and "RECEIVING STREAM PORT
No." as follows.
CH1: IP address of the decoder/60000
CH2: IP address of the decoder/60001
CH3: IP address of the decoder/60002
CH4: IP address of the decoder/60003
CH2: IP address of the decoder/60001
CH3: IP address of the decoder/60002
CH4: IP address of the decoder/60003
Confirm that the "RECIVING STREAM IP
ADDRESS" and the "RECEIVING STREAMING
PORT No." for all the channels have the same IP
addresses and the port number entered for the
"DESTINATION IP ADDRESS" and "DESTINATION
PORT No." on the VIDEO page of the encoder. After
the confirmation, open the CONTROL/STATE page
of the encoder and click the [START] buttons for all
channels.
ADDRESS" and the "RECEIVING STREAMING
PORT No." for all the channels have the same IP
addresses and the port number entered for the
"DESTINATION IP ADDRESS" and "DESTINATION
PORT No." on the VIDEO page of the encoder. After
the confirmation, open the CONTROL/STATE page
of the encoder and click the [START] buttons for all
channels.
• Click the [START] button after changing the IP
addresses for "RECEIVING STREAM IP ADDRESS"
and port numbers for "RECEIVING STREAM PORT
No." when changing the stream to be displayed on
the monitor temporarily. Select how to receive the
streaming video and audio from "UNICAST" or
"MULTICAST".
The default setting is "MULTICAST" for all channels.
and port numbers for "RECEIVING STREAM PORT
No." when changing the stream to be displayed on
the monitor temporarily. Select how to receive the
streaming video and audio from "UNICAST" or
"MULTICAST".
The default setting is "MULTICAST" for all channels.
■ Item Descriptions
CH1 - CH4
Numbers of the VIDEO OUT 1 - 4 connectors of the
decoder
decoder
UNICAST/MULTICAST
Select how to receive the streaming video and audio
from "UNICAST" or "MULTICAST".
The default setting is "MULTICAST" for all channels.
from "UNICAST" or "MULTICAST".
The default setting is "MULTICAST" for all channels.
RECEIVING IP ADDRESS/RECEIVING PORT No.
The "DESTINATION IP ADDRESS" and the
"DESTINATION PORT No." should be the same
values entered for the "RECEIVING IP ADDRESS"
and the "RECEIVING PORT No." of the decoder.
If they are not the same, streams cannot be
displayed on monitors connected to the decoder.
1024 to 65535 are available for the "DESTINATION
IP ADDRESS".
The default settings of the "DESTINATION IP
ADDRESS" and the "DETINATIONPORT No." for
"CH1", "CH2", "CH3" and "CH4" are as follows.
"DESTINATION PORT No." should be the same
values entered for the "RECEIVING IP ADDRESS"
and the "RECEIVING PORT No." of the decoder.
If they are not the same, streams cannot be
displayed on monitors connected to the decoder.
1024 to 65535 are available for the "DESTINATION
IP ADDRESS".
The default settings of the "DESTINATION IP
ADDRESS" and the "DETINATIONPORT No." for
"CH1", "CH2", "CH3" and "CH4" are as follows.
CH1: 239.192.10.1/50000
CH2: 239.192.10.2/50000
CH3: 239.192.10.3/50000
CH4: 239.192.10.4/50000
CH2: 239.192.10.2/50000
CH3: 239.192.10.3/50000
CH4: 239.192.10.4/50000
When "UNICAST" is selected, refer to "Notes" in the
left column on this page.
left column on this page.