Panasonic wj-fs216 사용자 설명서

1. Set the MODE SELECT/CAMERA SELECT switch to

CAMERA SELECT.

2. Press one of the camera selection buttons for dis-

play on the monitor.
The LED on the selected button lights and the
selected camera picture appears on the monitor.

1. Set the MODE SELECT / CAMERA SELECT switch

to CAMERA SELECT.

2. Press the SEQUENCE / ALARM RESET button.

A sequence of single pictures is displayed in the
order and dwell time selected for the SEQUENCE
SETUP parameter in MENU 3 OF 3.

-15-

Before starting operation, set up the items in MENU 1-3
OF 3.

Set SYSTEM MODE in MENU 3 OF 3 to MULTIPLEX or
MULTISCR depending on your specific needs.

Select this mode to monitor camera pictures or play-
back pictures.

The operations enabled in MULTIPLEX mode are
described below.

■

Set the time lapse VTR to the stop mode or

recording mode.

1. Set the MODE SELECT/CAMERA SELECT switch to

MODE SELECT.

2. Press button 8 (CAMERA/VTR). The CAMERA / VTR

indicator goes off.

3. Press button 16 (STILL ON). The STILL ON indicator

goes off.

CAMERA/VTR

8

STILL ON

16

ENTRANCE

Camera Picture

Camera 3 Picture

Camera 6 Picture

Example of  single spot picture sequence

CAMERA

SELECT

MODE

SELECT

3. To cancel the sequence, press the desired camera

selection button.
The selected camera picture appears in spot on the
monitor.