Panasonic wj-fs216 사용자 설명서
-25-
• Remote Control
You can control the SEQUENCE, MULTISCREEN/QUAD SHIFT, and the camera selection buttons from a remote con-
troller. These functions are activated by contact with the ground terminal (open collector output or normally open con-
tact).
troller. These functions are activated by contact with the ground terminal (open collector output or normally open con-
tact).
• Connect the ALARM/REMOTE connector (pin 23) to the ground terminal as shown below. Switches 1 - 16 select the
cameras (they do not control the alarm input).
Notes:
• Any two or more switches closed at the same time will cause this unit to malfunction.
• SEQUENCE is assigned to switch 17 and MULTISCREEN/QUAD SHIFT to switch 18.
• When no operation is taking place, all switches except switch 19 must be open as shown below.
• SEQUENCE is assigned to switch 17 and MULTISCREEN/QUAD SHIFT to switch 18.
• When no operation is taking place, all switches except switch 19 must be open as shown below.
15
16
14
13
12
11
10
9
8
7
6
5
4
3
2
1
17
18
19
Switch
Switch
GROUND
SEQUENCE
MULTISCREEN
/QUAD SHIFT
Switch
Camera Selection
D-SUB CONNECTOR
(MALE)