JVC av-21qt4sj 사용자 설명서

ENGLISH - 14 -

Connect the External Equipments

Via the Euroconnector

Your TV set has two Euroconnector sockets. If you want to

connect equipments (e.g. video recorder, decoder, etc.)

which have Euroconnectors, to your TV, use the EXT.1

(EXT-1) or EXT.2 (EXT-2) terminals.
If an external device is connected via Euroconnector sockets

TV is switched to AV mode automatically.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the

EXT.2 terminal. If not, the T-V LINK function will not work

properly.
When connecting a T-V LINK compatible VCR to the EXT.2

terminal, be sure to connect the decoder to the VCR. If not,

the T-V LINK function may not work properly. And then set

the DECODER(EXT-2) function for the channel to ON to un-

scramble a scrambled channel. For details, see Using the

Decoder (EXT-2) function on page 11.

RGB mode

If an equipment can output the RGB signals, connect it to

the EXT.1 (EXT-1) terminal.

EXT-2S Mode

If the equipment connected to your TV set supports S-Video

(Y/C) output from Euroconnector, you can have a better pic-

ture quality by selecting EXT-2S mode and connecting your

equipment to the EXT.2 (EXT-2S) terminal of TV. See your

equipment's booklet to check if your equipment has such

feature.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has

the RCA jacks, connect it to the Front AV (EXT-3) terminal

with the video and audio cables.
If the equipment has the mono audio jack, connect it to the

AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA

jacks, connect it to the TV with an aerial cable. For details,

see the manual provided with the equipment.
To store the test signal that comes from the equipment,

see INSTALL Menu on page 10 and store it to the pro-

gramme number 0. You can watch images from that equip-

ment to select the programme number which you stored the

test signal.

TV and Video Recoder (VCR)

Connect the Video Recorder to the ANT (antenna input)

socket of the TV with the aerial cable.

Connect the Video Recorder to the EXT.1 (EXT-1) or EXT.2

(EXT-2) terminal with the SCART cable, or connect it to the

Front AV (EXT-3) terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press

AV button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV

mode.

Copy Facility

You can output the video and audio signals which inputs from

TV or EXT.1 (EXT-1) terminal to the video recorder connected

to the EXT.2 (EXT-2) terminal.
To select the output source, see Setting External Source

Output on page 9.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect

headphones.

01-ENG-2129-AK45-1512UK-(AV-21QT4SJ)-50053508.p65

26.07.2004, 17:06