JVC exad kw-avx 700 사용자 설명서

다운로드
페이지 235
ENGLISH
55
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service 
center.
Symptoms
Remedies/Causes
General
•  No sound comes out of the center speaker.
Center speaker is used only for surround playback. No sound 
comes out for stereo playback.
•  No sound comes out of the subwoofer while 
playing in stereo.
This happens while playing some discs with “Auto” selected 
for “Surround On” (☞ pages 23 and 48). Cancel surround.
•  The monitor is not clear and legible for 
watching the playback picture.
Sunshine from the windshield may cause this symptom.
Adjust “Bright” and “Contrast” of “Screen Control.” (☞ 
page 43).
•  Remote controller does not work.
Deactivate Dual Zone (☞ page 26).
(While Dual Zone is activated, the remote controller only 
functions for operating the DVD/CD player.)
•  “Position Error Push Open Key” appears on the 
monitor.
The monitor panel angle has been forcibly adjusted, or 
interrupted while opening or closing. Press OPEN/CLOSE.
•  “Mecha Error Push Reset” appears on the 
monitor, and the panel does not move.
Reset the unit (☞ page 2).
•  “SD Loading Error” appears on the monitor.
SD is not inserted fully. Fully insert it into the slot to close 
the monitor panel.
•  The unit does not work at all.
Reset the unit (☞ page 2).
FM/AM
•  SSM automatic presetting does not work.
Store stations manually.
•  Static noise while listening to the radio.
Connect the aerial firmly.
Disc playback
•  Disc can be neither recognized nor played .
Eject the disc forcibly (☞ page 2).
•  Disc cannot be ejected.
Unlock the disc (☞ page 19).
•  Recordable/Rewritable discs cannot be played 
back.
•  Tracks on the Recordable/Rewritable discs 
cannot be skipped.
•  Insert a finalized disc.
•  Finalize the discs with the component which you used for 
recording.
•  “Disc Error Please Eject” appears on the 
monitor.
Insert the disc correctly again.
•  “Eject Error” or “Loading Error” appears on the 
monitor.
Changing the source by pressing SOURCE will solve this 
error.
•  Sound and pictures are sometimes interrupted 
or distorted.
•  Stop playback while driving on rough roads.
•  Change the disc.
•  No playback picture appears on the monitor.
Parking brake wire is not connected properly. (☞ 
Installation/Connection Manual.)
•  “Region Error Please Eject” appears on the 
monitor when you insert a DVD Video.
Region code is not correct (☞ page 5).
EN55-59_KW-AVX700E_f.indd   55
EN55-59_KW-AVX700E_f.indd   55
06.2.16   9:42:26 PM
06.2.16   9:42:26 PM