JVC GR-D771U 사용자 설명서

다운로드
페이지 48
MasterPage: Video_Heading0_Right
EN
 21
RECORDING & PLA
YBACK
VIDEO PLAYBACK
1
Load a cassette. (
 pg. 16)
2
Set the VIDEO/MEMORY Switch to 
“VIDEO”.
3
Set the Power Switch to “PLAY” while 
pressing down the Lock Button located on the 
switch.
The above screen (referring to the control lever 
(
 pg. 7)) will be displayed for approx. 3 
seconds on the LCD Monitor.
4
To start playback, press 
6.
5
To stop playback, press 
7.
During Stop mode, press 
1
 to rewind, or 
¡
 
to fast-forward the tape.
Press SET to display the guide operation 
screen.
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–
towards “+” to turn up the volume, or towards 
“–” to turn down the volume.
NOTES:
The playback picture can be viewed in the LCD 
monitor, viewfinder or on a connected TV. 
(
 pg. 23)
If Stop mode continues for 5 minutes when 
power is supplied from a battery, the camcorder 
shuts off automatically. To turn the camcorder on 
again, push back and pull out the viewfinder 
again or close and re-open the LCD monitor.
When a cable is connected to the AV connector, 
the sound is not heard from the speaker.
Appears when pictures recorded in the HDV 
format are detected. The pictures in the HDV 
format cannot be played back with this 
camcorder.
Still Playback
Pauses during video playback.
1) Press 
6 during playback.
2) To resume normal playback, press 
again.
If still playback continues for more than about 
3 minutes, the camcorder’s Stop mode is 
automatically engaged.
Normal Playback
Operation
To select
6
Move the control lever up. 
7
Move the control lever down.
¡
Move the control lever right.
1
Move the control lever left.
Speaker
6
6
6
6
Lock Button
¡
¡
¡
¡
7
MENU
1
1
1
1
VOL. +/–
VIDEO/
MEMORY
Power 
Switch
BLANK
SET
HDV
GR-D771US_EN.book  Page 21  Friday, December 15, 2006  9:08 AM