JVC GR-DVX48SH 사용자 설명서

 EN

°

°

●

The image will not appear simultaneously on the LCD
monitor and the viewfinder.

●

If the Record-Standby mode continues for 5 minutes, the
camcorder’s power shuts off automatically. To turn the
camcorder on again, push back and pull out the
viewfinder again or close and re-open the LCD monitor.

●

When a blank portion is left between recorded scenes
on the tape, the time code is interrupted and errors
may occur when editing the tape. To avoid this, refer to
“Recording From The Middle Of A Tape” (

Z

 pg. 20).

●

Z

(Now calculating)

(Blinking)

(Blinking)

(Blinking)

.... rotate the MENU Wheel until the bright level indicator

on the display moves and the appropriate brightness is
reached.

•It is also possible to adjust the brightness of the viewfinder.

You should already have performed the procedures listed
below. If not, do so before continuing.

●

Power (

Z

 pg. 8)

●

Grip Adjustment (

Z

 pg. 10)

●

Viewfinder Adjustment (

Z

 pg. 10)

●

Load A Cassette (

Z

 pg. 12)

●

Recording Mode Setting (

Z

 pg. 13)

Set the VIDEO/DSC Switch to “VIDEO”
(GR-DVX78 only), then set the Power Switch to
“

” or “

” while pressing down the Lock Button

located on the switch.

Make sure

the viewfinder is pushed back in. Open the LCD
monitor fully.

 Make sure the

LCD monitor is closed and locked. Pull out the
viewfinder fully.
•Be sure to pull out the viewfinder until you hear a

click, otherwise it may be pushed back in during
use.

•The Power lamp lights and the camcorder enters the

Record-Standby mode. “PAUSE” is displayed.

Press the Recording Start/Stop Button. “

 ”

appears while recording is in progress.

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

Z pg. 77