JVC GY-HM700CHE 사용자 설명서

Set the [POWER] switch to 

AONB. The camera recorder 

starts up in Camera mode and is ready for shooting.

You have to configure video settings such as brightness 
adjustment (iris, gain, shutter) and white balance adjustment 
in order to start shooting. You also have to adjust the audio 
input settings and audio recording level for audio recording.

● Adjusting the Iris (A Page 37)

● Setting Gain (A Page 37)

● Setting the Electronic Shutter (A Page 38)

● Adjusting the White Balance (A Page 40)

● Adjusting the White Shading (A Page 42)

● Setting the ND Filter (A Page 43)

● Adjusting Audio Input Settings and Recording Level 

● There are two [REC] buttons on the camera recorder and 

one on the lens. Any of the [REC] buttons can be used to 
start/stop recording by default.

● During recording, the front and back tally lamps light up in 

red.

● Tally lamps can be turned off with [Front Tally]/[Back Tally] 

in the [Others] menu. (

● To separately control this camera recorder and other 

equipment connected to the [IEEE1394] terminal, you can 
configure the setting at [1394 Rec Trigger] in the [Others] 

menu. (

Press the [RET] button on the lens to activate the Clip 
Review function (

A Page 52). The most recently captured 

images are played back on the LCD monitor and viewfinder 
screens. After playback, the camera recorder returns to 
standby mode (STBY).

* When [Main Menu]

B[Camera Function]B[Switch 

Set...]

B[LENS RET] is set to 

AClip ReviewB (A Page 74)

[REC] Button

[REC] Button

[POWER] Switch

Back Tally Lamp

Front Tally Lamp