JVC KD-LX50R 사용자 설명서

37

STOP

PLAY

You can store the frequently-used operations into the Access Commands and register your
voice to make the System execute the Access Commands.
• You can store the following operations into the Access Commands;

– Selecting CD or External component as the source.
– Selecting the frequencies. (FM and AM)
– Selecting the band and preset number. (DAB)
– Selecting the CDs in the CD changer.

Before you start...
• Set “VOICE DEMO” to “DEMO OFF.”

Without setting it to “DEMO OFF,” you cannot preset the Access Commands.

• Notice the following;

– You can store up to 12 Access Commands (12 operations and voice commands into

memory).

– Each voice command must be within 3 second long.
– You can register any word you want; however, if it is too short (ex: “Pops”), the System

may not recognize it correctly.

EXAMPLE:
Storing an operation of “selecting the FM station of 89.5 MHz,” and registering words “Jazz
89” as your Access Command to that operation into Access Command number 14.

1

4

3

2

Voice remote

TO BE CONTINUED ON THE NEXT PAGE

Select the User Word mode by following steps 1 to 4 on page 34.

1

Press and hold SEL (Select) for more than 2 seconds so that one of the PSM
items appears on the display.

2

Press 

 

¢

 or 

4

 

 repeatedly until “VOICE DEMO” appears on the display.

3

Press – to select  “DEMO OFF.”

4

Press SEL again to finish the setting.

EN30-47.KD-LX50R[E]/f

00.3.22, 10:36 AM

37