JVC KD-R301 사용자 설명서

다운로드
페이지 42
ENGLISH
14
SETTINGS
Category Menu items
Selectable settings, [reference page]
TUNER
AF-REG 
*
4
Alternative 
frequency/
regionalization 
reception
•  AF ON
•  AF-REG ON
•  OFF
:  When the currently received signals become weak, the unit 
switches to another station (the programme may differ 
from the one currently received), [9].
  •  The AF indicator lights up.
:  When the currently received signals become weak, the 
unit switches to another station broadcasting the same 
programme.
  •  The AF and REG indicators light up.
: Cancels.
PTY-STANDBY 
*
4
PTY standby
PTY OFF, PTY 
codes
Activates PTY Standby Reception with one of the PTY codes, 
[9].
TA VOLUME 
*
4
Traffic 
announcement 
volume
VOLUME 00 
– VOLUME 50 
(or VOLUME 00 
– VOLUME 30)
*
5
Initial: VOLUME 15
P-SEARCH 
*
4
Programme search
•  SEARCH ON
•  SEARCH OFF
:  Activates Programme Search, [9].
: Cancels.
MONO 
*
6
Monaural mode
•  MONO ON
•  MONO OFF
:  Activate monaural mode to improve FM reception, but 
stereo effect will be lost, [7].
:  Restore the stereo effect.
IF BAND
Intermediate 
frequency band
•  AUTO
•  WIDE
:  Increases the tuner selectivity to reduce interference noises 
between adjacent stations. (Stereo effect may be lost.)
:  Subject to interference noises from adjacent stations, but 
sound quality will not be degraded and the stereo effect 
will remain.
AUDIO
FADER
*
7
Fader
R06 – F06
:  Adjust the front and rear speaker output balance.
  [Initial: 00]
BALANCE 
Balance
L06 – R06
:  Adjust the left and right speaker output balance.
  [Initial: 00]
LOUD
Loudness
•  LOUD OFF
•  LOUD ON
: Cancels.
:  Boost low and high frequencies to produce a well-balanced 
sound at a low volume level.
AUX ADJUST
Auxiliary input 
level adjustment
AUX ADJ 00 
— AUX ADJ 05
:  Adjust the auxiliary input level to avoid the sudden 
increase of the output level when changing the source to 
external component connected to the AUX input jack on 
the control panel.
*
4
  Only for FM Radio Data System stations.
*
5
  Depends on the amplifier gain control.
*
6
  Displayed only when the source is “FM.”
*
7
  If you are using a two-speaker system, set the fader level to “00.”
EN10-17_KD-R303_003A_f.indd   14
EN10-17_KD-R303_003A_f.indd   14
12/9/08   5:56:56 PM
12/9/08   5:56:56 PM