JVC GET0698-001A 사용자 설명서

3 – EN

Repeat step 2 if necessary.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.

Category

Menu item

Selectable setting, [

Initial: Underlined

]

DEMO

• DEMO ON

• DEMO OFF

: Display demonstration will be activated automatically if

no operation is done for about 20 seconds.

: Cancels.

CLOCK

CLOCK SET

[ 1:00 ]

: Adjust the hour, then the minute.

PRO EQ

BASS

—

: For settings, see “Storing your own sound mode.”

MIDDLE

TREBLE

DISPLAY

DIMMER

• DIMMER ON
• DIMMER OFF

: Dims the display and button illumination.
: Cancels.

SCROLL *

• SCROLL ONCE
• SCROLL AUTO
• SCROLL OFF

: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.

Pressing DISP for more than one second can scroll the display regardless of the
setting.

TAG
DISPLAY

• TAG ON

• TAG OFF

: Shows the Tag information while playing MP3/WMA

tracks.

: Cancels.

TUNER

SSM *

• SSM 01 – 06
• SSM 07 – 12
• SSM 13 – 18

: For settings, see “Automatic presetting (FM)—SSM

(Strong-station Sequential Memory)” on page 2.

AREA

• AREA US

• AREA EU

• AREA SA

: When using in North/Central/South America. AM/FM

intervals are set to 10 kHz/200 kHz.

: When using in any other areas. AM/FM intervals are set

to 9 kHz/50 kHz (100 kHz during auto search).

: When using in South American countries where FM

interval is 100 kHz. AM interval is set to 10 kHz.

MONO *

• MONO ON

• MONO OFF

: Activate monaural mode to improve FM reception, but

stereo effect will be lost.

: Restore the stereo effect.

IF BAND

• AUTO

• WIDE

: Increases the tuner selectivity to reduce interference

noises between adjacent stations. (Stereo effect may be
lost.)

: Subject to interference noises from adjacent stations,

but sound quality will not be degraded and the stereo
effect will remain.

Category

Menu item

Selectable setting, [

Initial: Underlined

]

AUDIO

FADER *

R06 – F06 [ 00 ]

: Adjust the front and rear speaker output balance.

BALANCE *

L06 – R06 [ 00 ]

: Adjust the left and right speaker output balance.

LOUD

• LOUD ON

• LOUD OFF

: Boost low and high frequencies to produce a well-

balanced sound at a low volume level.

: Cancels.

VOL ADJUST VOL ADJ –05 —

VOL ADJ +05
[ VOL ADJ 00 ]

: Preset the volume adjustment level of each source

(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease when
you change the source.

• Before making an adjustment, select the source you

want to adjust.

• “VOL ADJ FIX” appears on the display if “FM” is selected

as the source.

L/O MODE

• SUB.W

• REAR

: Select if the REAR LINE OUT terminals are used for

connecting a subwoofer (through an external amplifier).

: Select if the REAR LINE OUT terminals are used for

connecting the speakers (through an external amplifier).

SUB.W
FREQ *

• LOW
• MID
• HIGH

:  Frequencies lower than 72 Hz are sent to the subwoofer.
:  Frequencies lower than 111 Hz are sent to the subwoofer.
:  Frequencies lower than 157 Hz are sent to the subwoofer.

SUB.W
LEVEL *

SUB.W 00 —
SUB.W 08
[ SUB.W 04 ]

: Adjust the subwoofer output level.

BEEP

• BEEP ON
• BEEP OFF

: Activates the keypress tone.
: Deactivates the keypress tone.

AMP GAIN *

• LOW POWER

• HIGH POWER

: VOLUME 00 – VOLUME 30 (Select if the maximum power

of each speaker is less than 50 W to prevent damaging the
speakers.)

: VOLUME 00 – VOLUME 50

SRC

SELECT

AM *

• AM ON
• AM OFF

: Enable “AM” in source selection.
: Disable “AM” in source selection.

AUX IN *

• AUX ON
• AUX OFF

: Enable “AUX IN” in source selection.
: Disable “AUX IN” in source selection.

Some characters or symbols will not be shown correctly (or will be blanked) on the display.

Displayed only when the source is “FM.”

If you are using a two-speaker system, set the fader level to “00.”

This adjustment will not affect the subwoofer output.

Displayed only when <L/O MODE> is set to <SUB.W>.

The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level
is set higher than “VOLUME 30.”

Displayed only when any source other than “AM” is selected.

Displayed only when any source other than “AUX IN” is selected.

Menu operations

Selecting a preset sound mode

You can select a preset sound mode suitable for the music genre.

FLAT

= NATURAL = DYNAMIC =

VOCAL BOOST

= BASS BOOST =

USER

= (back to the beginning)

While listening, you can adjust the tone level of the selected sound
mode.

Adjust the level (–06 to +06) of the selected tone (BASS /
MIDDLE / TREBLE).
The sound mode is automatically stored and changed to “USER.”

Storing your own sound mode

You can store your own adjustments in memory.

] <PRO EQ> ] <BASS> / <MIDDLE> / <TREBLE>

Adjust the sound elements of the selected tone ( see table on
the right).

Repeat steps 2 and 3 to adjust other tones.
The adjustments made will be stored automatically in “USER.”

The current sound mode changes to “USER” automatically.

Tone

Sound element

Frequency

Level

BASS

60 Hz, 80 Hz, 100 Hz,
200 Hz

–06 to +06

Q1.0, Q1.25,

Q1.5, Q2.0

MIDDLE

0.5 kHz, 1.0 kHz,
1.5 kHz, 2.5 kHz

–06 to +06

Q0.75, Q1.0,

Q1.25

TREBLE

10.0 kHz, 12.5 kHz,
15.0 kHz, 17.5 kHz

–06 to +06

Q FIX

[Hold]

EN_KD-S27[J]_f.indd 3

7/1/10 3:43:29 PM