JVC lt-26d50bj 사용자 설명서

Troubleshooting

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

• If the TV suffers interference from signals 

reflecting from mountains or buildings, 

double-pictures (ghosting) will occur. Try 

to change the aerial’s direction or replace 

it with one with better directionality.

• Are your COLOUR SYSTEM settings 

correct? Follow the description 

to solve the trouble.

• Have the COLOUR and BRIGHT settings 

been adjusted properly? Follow the 

description “BRIGHT-2” and 

“COLOUR” on page 45 to try to adjust 

them properly.

• Videotaping teletext is not recommended 

because it may not record correctly.

• When viewing images from commercially 

available video software products, or 

videos from videotapes which have been 

recorded improperly, the top of the image 

may be distorted. This is due to the 

condition of the video signal. There is 

nothing wrong with the TV.

• Since this TV is designed to make full use 

of the resolution of the original video 
source, the motion may appear unnatural 
when the video source is input with 625p 

progressive-scanning component signals.
If this occurs, change the output setting of 
the connected device to 625i interlace-

scanning component signal output. See 
the instructions that came with the device 
for more information.

„

• Have you adjusted BASS or TREBLE 

properly? If not, follow the description 
“BASS” or “TREBLE” on page 49.

• When TV channel reception is poor, it can 

be hard to hear stereo or bilingual sound. 

In this case, follow the description 
“STEREO / I • II” on page 49 to hear the 
sound more easily by changing it to a 

mono sound.

„

• Have the batteries of the remote control 

worn out? Follow the description “Putting 
the batteries into the remote control” on 

page 10 and replace them with new 
batteries.

• Have you attempted to use the remote 

control from the sides or rear of the TV or 
from more than seven metres away from the 

TV? Use the remote control in front of your 
TV or from less than seven metres away.

• When you are viewing a teletext 

programme, you cannot operate the 
menus. Press the 

 button to 

return to the ordinary TV programme, and 

then try operating the menus.

• If the TV suddenly stops responding, 

disconnect the power cord of the TV from 
the AC outlet. Connect them to the AC 
outlet again to turn on the TV. If the TV 

returns to a normal state, it is not a failure.

„

• When the SLEEP TIMER function 

operates, the TV is automatically turned 

off. If the TV suddenly turns off, try to 
press the # (standby) button to turn on 
the TV once again. If the TV goes back to 

normal, there is no problem.

• When the TV is receiving a wide-screen 

signal (WSS) or a signal from an external 

device affecting the screen size, the 
ZOOM mode automatically changes. 
When you want to resume the previous 

ZOOM mode, press the c button 
again.

• It takes a short period of time from the 

time an operation such as changing 

channels is performed until an image is 

displayed. This is not a fault. This is the 

time needed for the image to stabilise 

before it can be displayed.

• The TV may make a crackling sound due 

to a sudden change in temperature. The 

picture or sound may be normal. If you 
hear crackling sounds frequently while 
you are viewing the TV, there may be 

other causes. As a precaution, ask your 
service technician to inspect it.

LT-32&26D50BJSJ_Eng.book  Page 68  Thursday, October 7, 2004  4:42 PM