JVC MX-WMD90 사용자 설명서
– 42 –
English
Ex.: When you want to erase track 4
6
Rotate the right jog dial to select the track you want
to move.
to move.
7
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number again.
8
Rotate the right jog dial to select the position where
you want to move the track.
you want to move the track.
9
Press SET.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks by repeating from step
6.
6.
10
Press ENTER (START) to finish the editing
procedure.
procedure.
11
Press
0 for MD deck B to eject the MD.
“WRITING” appears while the editing you have
made is being recorded on the MD.
made is being recorded on the MD.
ERASE Function
This function allows you to erase an unwanted track.
• To stop any time during editing process, press MD EDIT.
• To stop any time during editing process, press MD EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD B
loading slot.
loading slot.
Ex.: When you want to move track 5
Ex.: When you want to move to the track 3 position
2
Press one of the MD number buttons (MD 1, MD 2,
and MD 3) corresponding to the MD you want to
edit.
MD deck B starts playing the MD.
and MD 3) corresponding to the MD you want to
edit.
MD deck B starts playing the MD.
3
Press MD EDIT.
MD deck B enters editing mode (with DIVIDE
function selected).
MD deck B enters editing mode (with DIVIDE
function selected).
4
Rotate the right jog dial until “ERASE ?” appears.
5
Press SET.
6
Rotate the right jog dial to select the track you want
to erase.
to erase.
7
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
8
Press ENTER (START) to finish the editing
procedure.
procedure.
9
Press
0 for MD deck B to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
is being recorded on the MD.
Continued
EN38-48.CA-WMD90R[E]/f
99.4.1, 6:01 PM
42