JVC xm-px50wt 사용자 설명서
XM-PX50WT
1-6
Prior to performing the following procedure, remove
the MD door assembly and the holder assembly.
the MD door assembly and the holder assembly.
Open the battery lid. Release the tab d and pull out
the battery lid.
the battery lid.
Remove the screw B and pull out the side arm (R)
upward.
upward.
Remove the two screws C and pull out the eject unit.
Remove the screw D, E, F and G attaching the
chassis assembly respectively.
chassis assembly respectively.
Disengage the three joints e of the bottom case and
the battery holder. Remove the chassis assembly
and the jack cover at once.
the battery holder. Remove the chassis assembly
and the jack cover at once.
1.
2.
3.
4.
5.
Removing the chassis assembly
(See Fig.5 to 7)
Chassis assembly
Side arm (R)
Battery lid
Tab d
Joint e
B
C
Eject unit
C
G
D
F
E
Bottom case
Battery holder
Joints e
Battery lid
Chassis assembly
Fig.5
Fig.6
Fig.7
Chassis assembly
Joint e
Joints e