Toshiba 50L2200U 사용자 설명서

112

In the CableClear field, select the desired setting. 

The available selections are Off, Low, Middle, and High. 
Low, Middle, and High will reduce the noise in varying 
degrees, from lowest to highest, respectively.

If the current input is ANT/CABLE or VIDEO, then the menu will 
display the text “CableClear.” If the current input is ColorStream

®

 

HD, HDMI 1, or HDMI 2, then the menu will display the text “DNR”. 

To save your new settings, highlight Done, and then press the 
ENTER button. 

To revert to your original settings, highlight Reset, and then 
press the ENTER button. 

The MPEG Noise Reduction feature allows you to reduce visible 
interference caused by MPEG compression. Choices for MPEG 
Noise Reduction are Off, Low, Middle, and High. Off is 
automatically selected when this feature is disabled (grayed out).

To select the MPEG Noise Reduction level:

Press the MENU button, and then open the Picture menu.

Highlight Noise Reduction, and then press the ENTER 
button.

Press the ( /  arrow) buttons to highlight the MPEG Noise 
Reduction field, and then press the ( /  arrow) buttons to 
select Off, Low, Middle, or High.

To save your new settings, highlight Done, and then press the 
ENTER button.

To revert to your original settings, highlight Reset, and then 
press the ENTER button. 

You can use the Game Mode feature for shorter frame delays when 
you need split-second timing between the on-screen display and 
input from the controller (such as music creation and high-action 
games).

This feature is more effective for 480i and 1080i input signals.