Toshiba 6100 사용자 설명서
User's Manual
O
PERATING
B
ASICS
4-16
2. Plug one end of the cable into the LAN’s jack. Press gently until you hear the
latch click into place.
Figure 4-13 Connecting the LAN cable
3.
Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
LAN administrator before connecting to a hub.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
CAUTION: Make sure the LAN Active indicator (yellow LED) is out
before you disconnect the computer from the LAN.
before you disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer’s LAN jack and pull out the
connector.
2.
Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
LAN administrator before disconnecting from the hub.
Network Device Switch
This application is used to select one network device on your system and to
prevent inconsistent routing table problems on TCP/IP networks.
prevent inconsistent routing table problems on TCP/IP networks.