Toshiba MAS 사용자 설명서



1. With a call in progress, press 

Record

. 

If you are using the auto method, the Record LED flashes rapidly and there is 
approximately a one second interval (in extreme busy conditions, up to five 
seconds) before the recording starts and the Record LED changes to the in-use 
interval flash rate. You are now recording. Continue to Step 3.

...or if you are using the manual method, the Record LED flashes green rapidly. 
Continue to Step 2.

2. (Manual method only) If you want to record the call to the predefined mailbox 

associated with the phone you are using, press 

#

. The Record LED flashes rapidly 

and there is approximately a one second interval (in extreme busy conditions, up to 
five seconds) before the recording starts and the Record LED changes to the in-use 
interval flash rate. You are now recording.

...or if you want to record this call to another mailbox, enter the mailbox number 
(usually the extension number). Finish by pressing 

#

.

 

The Record LED flashes 

rapidly and there is approximately a one second interval (in extreme busy 
conditions, up to five seconds) before the recording starts and the Record LED 
changes to the in-use interval flash rate. You are now recording.

3. To stop recording, press 

Record

. The LED turns off and the recording stops. To 

resume recording at this point, you need to begin a new recording, see Step 1 on  
previous page.

You can pause the recording while continuing the conversation by pressing 

PS/RES. 

The PS/RES LED flashes red. Your conversation is no longer being recorded.

To resume recording as part of the same message, press the 

PS/RES button again. 

You can pause and resume indefinitely throughout the conversation. The only limit 
may be a message length imposed by the voice mail system.