Toshiba portege 610ct 620ct 서비스 매뉴얼

4-37

To install the 610CT display mask, follow the steps below and refer to figure 4-25.

1.

Set the display mask in place and press firmly to secure the latches. Start at the
bottom five latches and work your way around the sides (four latches on each
side) and, finally, secure the six latches at the top.

2.

Secure two M2.5x6 screws at the bottom corners of the display cover.

3.

Replace two rubber seals to cover the screws.

4.

Replace the PCMCIA card, optional memory module, and battery pack as de-
scribed in sections 4.4, 4.3, and 4.2.