Toshiba H1 Series 사용자 설명서

TMP92CZ26A

92CZ26A-2

(4) External memory expansion

• Expandable up to 3.1G bytes (shared program/data area)

• Can simultaneously support 8/16-bit width external data bus

……

Dynamic data bus sizing

• Separate bus system

(5) Memory controller

• Chip select output

: 4 channel

• One channel in 4 channels is enabled detailed AC enable setting

(6) 8-bit timers

: 8 channels

(7) 16-bit timer/event counter

: 2 channel

(8) General-purpose serial interface : 1 channels

• UART/synchronous mode

• IrDA ver1.0 (115.2 kbps) selectable :

(There is the restriction in the setting baud rate when use this function together other functions)

(9) Serial bus interface: 1 channel

• I

C bus mode only

(10) USB (universal serial bus) controller: 1 channel

• Support to USB (REV1.1)

• Full-speed (12 Mbps) (Low-speed is not supported.)

• Endpoint 0: Control 64 bytes × 1-FIFO

Endpoint 1: BULK (output) 64 bytes

× 2-FIFO

Endpoint 2: BULK (input) 64 bytes

× 2-FIFO

Endpoint 3: Interrupt (input) 8 bytes

× 1-FIFO

• Descriptor RAM: 384 bytes

(11) I

S (Inter-IC Sound)interface: 2 channel

• I

S bus mode selectable (Master, transmission only)

• Data Format is supported Left/Right Justify

• Built in FIFO buffer of 128 bytes (64 bytes × 2) every each channels.

(12) LCD controller

• Supported up to monochrome, 4, 16 and 64 gray levels and 256/4096

color for STN

• Supported up to 4096/65536/262144/16777216 color for TFT

• Supported up to PIP (Picture In Picture Display)

• Supported up to H/W Rotation function for support to various LCDM

(13) SDRAM controller :1 channel

• Supported 16M, 64M, 128M, 256M and 512Mbit SDR (Single-data-rate) SDRAM

• Can use not only as Data RAM for LCD display but also operate program direct from SDRAM

(14) Timer for real-time clock (RTC)

• Based on TC8521A

(15) Key-on wakeup (Interrupt key input)

(16) 10-bit A/D converter (Built in Sample Hold circuit)

: 6 channels