MiTAC w130 서비스 매뉴얼
23
2.5 Battery status
Battery Warning
System also provides Battery capacity monitoring and gives user a
warning so that user has chance to save his data before battery dead.
Also, this function protects system from mal-function while battery
capacity is low.
Also, this function protects system from mal-function while battery
capacity is low.
Battery Warning: Capacity below 10%, Battery Capacity LED flashes per
second, system beeps per 2 seconds.
System will suspend to HDD after 2 Minutes to protect user data.
Battery Low State
After Battery Warning State, and battery capacity is below 4%, system will
generate beep for twice per second.
Battery Dead State
When the battery voltage level reaches 9.32 volts, system will shut down
automatically in order to extend the battery packs' life.
2.6 CMOS Battery
CR2032 3V 220mAh lithium battery
When AC in or system main battery inside, CMOS battery will consume
no power.
AC or main battery not exists, CMOS battery life at less (220mAh/5.8uA)
4 years.
Battery was put in battery holder, can be replaced.
2.7 I/O Port
I/O Port – USB #1