MiTAC w130 서비스 매뉴얼

다운로드
페이지 75
 
5
1 General system Description 
1.1 System Overview 
The LightNote W130 is a rugged and high portability industrial computer. The 
W130 also can connect with a docking to the capability of FLOPPY and 
CD-ROM and I/O device. The W130 model will support Intel Centrino mobile 
technology with Pentium-M Processors LV 1.1G, 1.2G  with Micro-FCBGA, 
12W in TDP and 1Mb L2 Cache. 
This system is based on PCI architecture, which have standard hardware 
peripheral interface. The power management complies with Advanced 
Configuration and Power Interface (ACPI 2.0). It also provides easy 
configuration through CMOS setup, which is built in system BIOS software 
and  can be pop-up by pressing F2 at system start up or warm reset
System also provides icon LEDs to display system status, such as Power 
indicator, HDD/CDROM, NUM LOCK, CAP LOCK, SCROLL LOCK, 
SUSPEND MODE and Battery charging status. It also one USB port. 
The memory subsystem supports One JEDEC-standard 200-pin, small-outline, 
dual in-line memory module (SODIMM), support PC2100 and up to 1GB DDR 
SDRAM. 
 
The W130 includes the 855GM chipset components GMCH and the ICH4-M. 
The Accelerated Hub Architecture interface (the chipset component 
interconnect) is designed into the chipset to provide an efficient, high 
bandwidth, communication channel between the GMCH and the ICH4-M. 
The GMCH component contains a processor system bus (PSB) controller, a 
graphics controller, and a memory controller, while providing an LVDS 
interface and two DVO ports. The ICH4-M component integrates USB host 
controllers (supporting the USB 1.1 and USB 2.0 specification), an Ultra ATA 
100/66/33 controller, a LAN controller, and an AC’97 digital controller, while 
providing interfaces for PCI and LPC devices,. 
 
To provide for the increasing number of multimedia applications, the AC97 
CODEC ALC201 is integrated onto the motherboard.