BMW x5 2003 사용자 설명서

Overview

Controls

Maintenance

Repairs

Data

Index

Computer

in the MID

After three incorrect code entries, or
three attempts to start the engine
without a code entry, the alarm will
sound for 30 seconds on vehicles fitted
with an alarm system.

Deactivating the alarm in an
emergency:

If you have forgotten the code, proceed
as follows:

1. Disconnect the battery, wait approx.

2 minutes, then reconnect it. Note
that on vehicles with an alarm
system, the alarm will sound

2. Set the ignition key to position 1:

The time display will count down for
the next ten minutes

3. After ten minutes, start the engine.

If the code becomes available
again in the meantime, it can be

entered during the waiting period after
pressing the CODE button.

Remote control

The button on the turn signal indicator
lever can be used to select the items of
computer information which are to
be displayed.

To do this, press:

the button on the lever until PROG
shows on the display

the MID buttons in the order in which
you wish the information to be dis-
played.
Each time an entry is stored, the pro-
gram number appears on the display.

To terminate the selection procedure:

Press the right side of the button.

530de228

To have all the available information
displayed, press

the button on the lever until the dis-
play shows PROG

the SET button.

To obtain individual items of informa-
tion, press the button in briefly as often
as necessary.