Kawasaki zx6r 636 서비스 매뉴얼
6 PREPARATION
Preparation
Battery Service
Rider’s Seat Removal
•
Unscrew the left and right side cover bolts
(D = 6) (3) and remove the covers by pulling
them outward to clear the projections.
(D = 6) (3) and remove the covers by pulling
them outward to clear the projections.
A. Left Side Cover
B. Bolts (D = 6)
C. Projections
B. Bolts (D = 6)
C. Projections
A. Right Side Cover
B. Bolt (D = 6)
C. Projection
B. Bolt (D = 6)
C. Projection
•
Remove the rider’s seat by pulling the front of
it up and forward.
it up and forward.
A. Rider’s Seat
The battery used in this motorcycle is a sealed
type and never needs to be refilled. Follow the
procedure for activating a new battery to ensure
the best possible battery performance.
procedure for activating a new battery to ensure
the best possible battery performance.
Activating the battery requires two steps, fill-
ing the battery with electrolyte, and charging.
Read the electrolyte safety label and the follow-
ing procedures carefully before battery activa-
tion.
Read the electrolyte safety label and the follow-
ing procedures carefully before battery activa-
tion.
CAUTION
Incorrect Battery Activation will reduce
battery performance and service life. Be
sure to strictly follow the Battery Service
instructions in this Manual.
battery performance and service life. Be
sure to strictly follow the Battery Service
instructions in this Manual.
•
Make sure to use the electrolyte packed in the
crate with the unit.
crate with the unit.
•
Make sure that the model name of the elec-
trolyte container matches the model name of
the battery. These names must be the same.
trolyte container matches the model name of
the battery. These names must be the same.
Battery Model Name for
ZX636-C1: YTX9-BS
A. Model Name of the Electrolyte
B. Model Name of the Battery
B. Model Name of the Battery