Yamaha 007POTO-G0 사용자 설명서

150

Using the Cue function

LS9-16/32 Owner’s Manual

Press the [CUE] key of a desired channel to
turn it on.

The Cue signal of the corresponding channel will be
sent to the monitor signal output destination.
You can also watch the Cue meter of the meter field to
check the output level of the cue signal. The ACTIVE
CUE indicator located below the Cue meter indicates
the CUE group (INPUT or OUTPUT) that is currently
turned on.

Press the DISPLAY ACCESS section [MONI-
TOR] button to access the MONITOR
screen, and use the MONITOR LEVEL knob
in the screen to adjust the level of the cue
signal.

If PHONES LEVEL LINK is ON, you can use both
the MONITOR LEVEL knob and the front panel
PHONES LEVEL control to adjust the monitor level
when monitoring through headphones.

To defeat Cue, press the [CUE CLEAR] key
or the currently-on [CUE] key once again.

If you want to clear all Cue selections, move the cursor
to the CUE CLEAR button in the CUE screen, and
press the [ENTER] key.

ACTIVE CUE indicator

CUE meter

• If you want Cue operations and channel select operations to

be linked, open the PREFERENCE popup window of the
USER SETUP screen, and turn “[CUE]>[SEL] LINK” on (

→

p. 194).

HINT

• All Cue selections will be cleared if you switch between MIX

CUE mode and LAST CUE mode in the CUE MODE section.

• You can also assign the same function as the CLEAR CUE

button to a user-defined key (

→ p. 196).

HINT