Yamaha AG-Stomp 사용자 설명서
27
● Set the Maximum Value of the EXP. Pedal
Sets the maximum value that indicates the position
of the EXP. Pedal.
Sets the maximum value that indicates the position
of the EXP. Pedal.
Press the [FR 1] button and use the [UP]/[DOWN]
buttons to set the position (
buttons to set the position (
127
-
255
).
You can also hold the [FR 1] button and move the
EXP. Pedal to set the position.
EXP. Pedal to set the position.
* Due to the relationship between the maximum and minimum
value, a value which results in a practical range of less than
128 can not be used.
128 can not be used.
* The value can not be set greater than that of the EXP. Pedal’s
Switch Setting.
Minimum
Value
Value
Maximum
Value
Value
Maximum
Adjustable
Range
Adjustable
Range
Practical Effective
Range
● Transmitting Control Change Numbers from
the EXP. Pedal
Sets the MIDI control change number that is to be
transmitted when the EXP. pedal is used.
transmitted when the EXP. pedal is used.
Press the [FR 2] button and use the [UP]/[DOWN]
buttons to set the control change number.
buttons to set the control change number.
•
oFF
: MIDI is not transmitted
•
1
-
32
,
64
-
95
:
The control change number that is to be
transmitted.
transmitted.
■ Feedback Reduction Operating
Mode
Press the [UTILITY] button and set the MIC TYPE
Select Switch to TUBE 1. After “
Select Switch to TUBE 1. After “
F.r
” appears in the
display, the current setting is displayed.
Use the [UP]/[DOWN] buttons to set the Feedback
Reduction Operating Mode.
Reduction Operating Mode.
•
GLb
: Even if the patch is changed, the same
Feedback Reduction parameters and
settings will remain active (the same as
the current condition).
settings will remain active (the same as
the current condition).
•
PrG
: When patches are changed, the Feed-
back Reduction’s parameters and set-
tings will be changed to those that are
stored with the patch’s data.
tings will be changed to those that are
stored with the patch’s data.
Utility Mode