Yamaha DD-65 사용자 설명서
Playing a Song
23
DD-65/YDD-60 Owner’s Manual
The Tap Start function allows you to set the song’s overall tempo as well as start the accompani-
ment—simply by tapping out the rhythm.
The accompaniment will playback at the tempo with which the pads are struck or the pedals are
pressed.
ment—simply by tapping out the rhythm.
The accompaniment will playback at the tempo with which the pads are struck or the pedals are
pressed.
1
Press the [BREAK/TAP] button.
2
Play the Tap Start.
3
Stop the Song Playback.
The Pad Start function allows to start the song simply by striking a pad or pressing a pedal.
To stop the song, press the [START/STOP] button.
To stop the song, press the [START/STOP] button.
1
Enter the Pad Start setting function.
2
Turn Pad Start On/Off.
3
Press the [FUNCTION] button to exit from the
Function mode.
Function mode.
Tap Start
While song playback is stopped, press the [BREAK/TAP] button. All
three of the beat lamps flash, indicating the instrument is set to Tap
Start standby.
To cancel the Tap Start mode, simply press the [BREAK/TAP] button
once again (the beat lamps will turn off).
three of the beat lamps flash, indicating the instrument is set to Tap
Start standby.
To cancel the Tap Start mode, simply press the [BREAK/TAP] button
once again (the beat lamps will turn off).
In the case of a song in 4/4, strike any pad or press any pedal four
times, and the accompaniment will start at the desired tempo.
times, and the accompaniment will start at the desired tempo.
• The number of times needed to strike the pad will change according to the
following time signatures; 5/4, 5 times; 4/4, 4 times; 3/4, 3 times; 6/8, 2
times.
times.
Press the [START/STOP] button and the song accompaniment will
stop.
stop.
Pad Start
Press the [FUNCTION] button once, then press the [DRUM 1] or
[DRUM 2] button a number of times until the “PdS” item appears.
After a while, the current On/Off status appears next to the “PdS”
indication.
[DRUM 2] button a number of times until the “PdS” item appears.
After a while, the current On/Off status appears next to the “PdS”
indication.
Turn the DIAL clockwise to set to ON, and turn it counter-clockwise
to set it to OFF.
to set it to OFF.
• Default setting is OFF.
010
1
2
3
4
NOTE
PdS
On
OFF
NOTE