Yamaha mc-1202 사용자 설명서

SPECIFICATIONS

Less than 0.1%, 20Hz – 20kHz @ +14dB

into 600 ohms.

+1, –3dB, 20Hz – 20kHz @ +4dB into

600 ohms

Hum and Noise* (20Hz –128dB

equivalent input noise.

– 20kHz, Rs=150 ohms, –90dB residual output noise (balanced

Input Gain max., Input outputs).

Pad @ 0dB, Input –73dB at STEREO OUT with master
Sensitivity –60dB) fader at nominal level and all

channel faders at minimum level.

–64dB at STEREO OUT with master

fader and one channel fader at
nominal level

–70dB at AUX SEND with AUX SEND

level control at nominal level

and all channel AUX controls at

minimum level.

–64dB at AUX SEND with AUX SEND

and, one AUX control at nominal

level,

Maximum Voltage Gain 84dB CH IN to STEREO OUT

84dB CH IN to AUX SEND 1
94dB CH IN to AUX SEND 2, 3
20dB AUX RETURN 1, 2 to STEREO OUT
10dB SUB IN to AUX SEND 1 – 3
10dB SUB IN to STEREO OUT

+48 VDC applied to electronically balanced inputs via 6.8 k-ohm

limiting resistors. Master ON/OFF switch.

U.S.&Canadian models: 120V AC, 60Hz
General model: 110 – 120/220 – 240V AC, 50/60Hz

Power Consumption MC1602: 60 watts

MC1202: 60 watts
MC802: 40watts

MC1602:  730 mm x 151 mm x 531 mm

(28-3/4” x 6” x 20-7/8”)

MC1202:  590 mm x 151 mm x 531 mm

(23-1/4” x 6” x 20-7/8”)

MC802: 450mm x 151 mm x 531 mm

(17-3/4” x 6” x 20-7/8”)

Weight MC1602: 18 kg. (39.7 Ibs.)

MC1202: 15 kg. (33.1 Ibs.)
MC802:  12 kg. (26.4 Ibs.)

Measured with a –6dB/octave LPF @ 12.7kHz.

0dB = 0.775Vr.m.s.

Specifications subject to change without notice.

–20 

~ 

–60dB variation in gain, stop to stop.

0/20dB of attenuation.

15dB maximum boost or cut in each of three bands.
HIGH: 10kHz (shelving)
MID: 350Hz – 5kHz (peaking)
LOW: 100Hz (shelving)

Crosstalk –60dB at 1 kHz, adjacent input channels.

–60dB at 1 kHz, input to output.

3 illuminated meters,
STEREO L, STEREO R, AUX1/AUX2/AUX3/CUE (switchable)

RED LED built into each input channel. Lights when post-EQ
channel signal is 3dB below clipping level.