Yamaha RX-V1600 사용자 설명서

다운로드
페이지 123
52
FM/AM TUNING
Radio Data System is a data transmission system used by 
FM stations in many countries. The Radio Data System 
function is carried out among the network stations.
This unit can receive various Radio Data System data such 
as PS (Program Service name), PTY (Program Type), RT 
(Radio Text), CT (Clock Time), EON (Enhanced Other 
Networks) when receiving Radio Data System 
broadcasting stations.
■ PS (Program Service name) mode
The name of the Radio Data System station being received 
is displayed.
■ PTY (Program Type) mode
There are 15 program types to classify Radio Data System 
stations.
■ RT (Radio Text) mode
Information about the program (such as the title of the 
song or name of the singer) on the Radio Data System 
station being received is displayed using a maximum of 64 
alphanumeric characters, including the umlaut symbol. If 
other characters are used for RT data, they are displayed 
with an underbar (_).
■ CT (Clock Time) mode
The current time is displayed and updated every minute.
If the data are accidentally cut off, “CT WAIT” may 
appear.
■ EON (Enhanced Other Networks)
See “EON function” on page 54.
Four modes are available for displaying Radio Data 
System data. The PS, PTY, RT and/or CT indicators that 
correspond to the Radio Data System data services offered 
by the station light up in the front panel display.
1
Set AMP/SOURCE/TV to SOURCE, then press 
TUNER on the remote control to set this unit 
to the tuner mode.
2
Press FREQ/TEXT repeatedly on the remote 
control to display the various Radio Data 
System data offered by the transmitting 
station.
• Do not press FREQ/TEXT until a Radio Data System indicator 
lights up in the front panel display. You cannot change the mode 
if you press the button prior to this. This is because this unit has 
not finished receiving all of the Radio Data System data from 
the station.
• Radio Data System data not offered by the station cannot be 
selected.
• This unit cannot utilize the Radio Data System data source if 
the signal received is not strong enough. In particular, the RT 
mode requires a large amount of data, so it is possible that the 
RT mode may not be displayed even if other Radio Data System 
modes (PS, PTY, etc.) are displayed.
• Radio Data System data may not be received under poor 
reception conditions. In such cases, press TUNING MODE 
(AUTO/MAN’L MONO) so that the AUTO indicator 
disappears from the front panel display. Although this will 
change the reception mode to manual, Radio Data System data 
may be displayed when you change the display to Radio Data 
System mode.
• If the signal strength is weakened by external interference 
during the reception of a Radio Data System station, the Radio 
Data System data service may be cut off suddenly and 
“...WAIT” will appear in the front panel display.
Receiving Radio Data System 
stations
NEWS
News
AFFAIRS
Current affairs
INFO
General information
SPORT
Sports
EDUCATE
Education
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Light entertainment
POP M
Pops
ROCK M
Rock
M.O.R. M
Middle-of-the-road music 
(easy-listening)
LIGHT M
Light classics
CLASSICS
Serious classics
OTHER M
Other music
Changing the Radio Data System 
mode
Notes
TUNER
AMP
SOURCE
TV
FREQ/TEXT
PS
PTY
RT
CT
Frequency display
Remote control