Yamaha R-S500BL 사용자 설명서

■ SIRIUS Satellite Radio

The following messages may be displayed on the front panel display in certain situations.

The antenna is not connected to the 
SiriusConnect tuner properly.

Check the connection of the antenna and 
SiriusConnect tuner.

This unit is communicating with the 
SiriusConnect tuner.

The message disappears normally within several tens 
of seconds.

—

The SiriusConnect tuner is not connected 
to the SIRIUS jack of this unit correctly.

Check the connection of the SiriusConnect tuner and 
this unit.

The SiriusConnect tuner is not connected 
to the AC wall outlet.

Connect the power cable of the SiriusConnect tuner 
to the AC wall outlet.

—

This unit does not support the connected 
SIRIUS Satellite Radio tuner.

Connect the SiriusConnect tuner that this unit 
supports,

—

The signal is too weak.

Adjust the orientation of the antenna of the 
SiriusConnect tuner. Check the antenna reception 
level from the Antenna information on the front 
panel display.

The SiriusConnect tuner is updating the 
channel list.

Wait until the updating is complete.

—

The period of the subscription is end.

Contact SIRIUS Satellite Radio to renew the 
subscription.

—

The SiriusConnect tuner is updating the 
firmware.

Wait until the updating is complete.

—

The selected channel is not subscribed.

Contact SIRIUS Satellite Radio to subscribe the 
selected channel.
URL: https://activate.siriusradio.com/
Phone: 1-888-539-SIRIUS (1-888-539-7474)

—

Select another channel.

The subscription information is updated.

—

The selected channel is currently out of 
service.

Select another channel.

The operation you made is not available.

—