Yamaha XM4080 사용자 설명서
XM4180/XM4080/XH200 Owner’s Manual
11
You may also connect speakers with different rated inputs
to different channels or connect speakers with different
rated input to the same channel, as shown below:
to different channels or connect speakers with different
rated input to the same channel, as shown below:
Be sure to use speakers that support the
XH200’s line-out voltage of 70V or 100V.
You cannot connect a low-impedance speaker
directly to the XH200. In this case, be sure to use
a speaker transformer (such as the Yamaha
ST15). Follow the instruction guide that came
with the speaker transformer to avoid excessive
loads.
a speaker transformer (such as the Yamaha
ST15). Follow the instruction guide that came
with the speaker transformer to avoid excessive
loads.
Connection
■
Using a Euroblock connector
1
If the wire insertion ports are closed, turn the screws on
top of the connector counterclockwise to open the ports.
top of the connector counterclockwise to open the ports.
2
Insert the wires into the appropriate ports, following the
indication of the pole on the input terminal, turn the
screws on top of the connector clockwise to fix the
wires.
indication of the pole on the input terminal, turn the
screws on top of the connector clockwise to fix the
wires.
3
Attach the Euroblock connector to the input terminal on
the unit.
the unit.
Total rated input of speakers : 200W
20 W x 10 speakers (200W)
10W
10 W x 20 speakers (200W)
10W
10W
20W
20W
20W
5 W x 10 speakers (50W)
15 W x 10 speakers (150W)
5W
15W
5W
15W
5W
15W
+
–
G
Use a screwdriver
to fix the wires.
9