Eizo CG221 사용자 설명서

Screen adjustments for the LCD monitor should be used in suppressing screen 
flickering and also for adjusting the screen to its proper position. There is only one 
correct position for each display mode. It is also recommended to use the 
ScreenManager function when first installing the display or whenever changing the 
system. For convenience, an easy set-up program installed on the utility disk to assist 
in the set-up procedure is provided. 

* Allow the LCD monitor to stabilize for at least 30 minutes before making image 

adjustments.

 

The message appears and remains on the screen for 5 seconds. While the message is on 
the screen, touch the Auto Adjustment switch again to automatically adjust the clock, 
phase, screen position and resolution. If you do not wish to do adjust the screen, do not 
touch the Auto Adjustment switch again.

* The Auto sizing function is intended for use on the Macintosh and on AT-

compatible PC running Windows. It may not work properly in either of the 
following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The 
background color for the "wall paper" or "desktop" pattern is set to black.