Eizo S1961 사용자 설명서

Chapter 4  Troubleshooting

If a problem still remains after applying the suggested remedies, contact your local dealer.

• No-picture problems → See No.1 - No.2.

• Imaging problems → See No.3 - No.11.

• Other problems → See No.12 - No.13.

1.  No picture

•  Power indicator does not light.

•  Check whether the power cord is connected correctly. If 

the problem persists, turn off the monitor, and then turn it 
on again a few minutes later.

•  Power indicator is lighting blue.
•  Power indicator is lighting orange.

•  Check Gain setting. (see page 15)
•  Operate the mouse or keyboard.

•  This message appears when no signal is input.

This message appears when the signal is not input 
correctly even when the monitor functions properly.
•  The message shown left may appear, because some 

PCs do not output the signal soon after power-on.

•  Check whether the PC is turned on.
•  Check whether the signal cable is connected properly.

•  The message below shows that the input signal is 

out of the specifi ed frequency range. (Such signal 
frequency is displayed in red.)

 Example:

•  Select an appropriate display mode using the graphics 

board’s utility software. Refer to the manual of the 
graphics board for details.

•  Adjust image position so that it is displayed properly 

within the display area using the 

 <Hor.Position> and 

 <Ver.Position> adjustment.

•  If the problem persists, use the graphics board’s utility 

software if available to change the display position.

• Adjust using 

 <Clock> from <Screen> menu at the 

Adjustment menu.

• Adjust using 

 <Phase>.

• Adjust 

 <Brightness>. (The LCD monitor backlight 

has a fi xed life span. When the screen becomes dark or 
begins to fl icker, contact your local dealer.)

•  Use a screen saver or off timer function for a long-time 

image display.

•  Afterimages are particular to LCD monitors. Avoid 

displaying the same image for a long time.